Sherline Self-Centering 2.5"(OD) 3-Jaw Chuck 1068
For use with Unimat SL1000
12mm x 1mm Spindle Thread
Three-jaw chucks are designed so that all three jaws move together and automatically center round or hexagonal parts stock to within a few thousandths of an inch. 3-jaw chucks provide the quickest and easiest way of holding work in the lathe. For this reason, they are the most popular of the Sherline accessories. The Sherline 3-jaw chucks are designed so that they can be used to clamp externally on bar stock or internally on tube stock. This 2.5" chuck is 12mm x 1mm spindle threads to fit other brand machines.)
This compact chuck is a good all-around workhorse for most lathe work. It has a clamping range of from 3/32" (2 mm) up to 1-3/16" (30 mm) diameter with the jaws in the normal position. With the jaws in the reversed position, work up to 2-1/4" (56 mm) can be gripped. The hole through the chuck is .687" (17 mm). Rotating the knurled ring closes all three jaws simultaneously to quickly grip round or hexagonal stock. Tommy bars (provided) are used in the holes in the side to tighten and loosen the chuck for more leverage.For use with Unimat SL1000
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13