Sherline 3561 90° Angle Plate (short)
This angle plate is a very useful work-holding fixture for milling. It is 3-1/2" long as opposed to the P/N 3559 90° angle plate which is 10" long. Parts can also be held from two directions at once. It can be used to hold parts on either the vertical or horizontal surface, but it's short length gives it the additional advantage of being able to be oriented either parallel to or perpendicular to the mill table, giving you some extra setup options when working on small parts. It has two T-slots running full length on each face. It is made from extruded aluminum with accurately machined faces and a black anodized finish. Provided with the plate are four 10-32 x 3/8" mounting screws and T-nuts.
This fixture is not limited to use on Sherline tools. Like the rotary table and some other Sherline accessories, it could be useful on larger machines in your shop as well.
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13