Band saws can put a lot of creativity into your woodworking. Cut the curves, make the boxes, and saw the cabriole leg. Who knows what you might create.
Powermatic 1791216K Powermatic PWBS-14CS, POW 14" WW Bandsaw w. stand (2Pc)
The PWBS-14CS Bandsaw has an extra large, two-piece cast iron table. It consists of a 15" x 15" tilting section and a fixed 15" x 5" extension for a total working surface area of 15" x 20". A balanced, nine-spoke cast iron wheel makes for smooth blade travel, and a Carter™ quick tension release lever makes blade changing easy. A micro-adjustable dual bearing blade guide system is featured above and below the table, as well as a work lamp and chip blower. A Poly-V belt maximizes power transmission while minimizing noise and vibration. It has full 6" under guide capacity with 13-1/2" frame to blade clearance. The aluminum rip fence comes with a resaw attachment.
- CARTER™ quick tension lever speeds blade changes, and the de-tension setting extends blade life during non-use
- Extra-large, two piece cast iron table consists of a 15" x 15" tilting section and a fixed 15" x 5" extension for a total working surface area of 15" x 20"
- Chip blower ensures a clean, visible cut line
- Durable micro-adjustable dual bearing blade guide system above and below the table for close blade control with less friction
- Exclusive design, quick-release precision T-square style rip fence with 4" resaw attachment
- Precision balanced, nine spoke cast iron wheels reduce vibration
- Easy to read tensioning gauge settings indicated in "blade width" increments
- Full 6" under guide capacity with 13-1/2" width capacity
- 60 watt adjustable lamp built into the body provides direct light on blade and work piece while cutting (bulb not included)
- Rigid one-piece welded stand requires no assembly
- Standard Equipment:
- CARTER™ quick tension release
- Adjustable miter gauge
- T-style rip fence with resaw assembly
- 3/8" bandsaw blade
- Gooseneck work lamp and chip blower
Specifications:
- Style (Type) Bandsaw
- Band Saw Size/Wheel Diameter (In.) 14
- Cutting Capacity Width (In.) 13-1/2
- Cutting Capacity Height (In.) 6
- Blade Length (In.) 93-1/2
- Blade Speed (SFPM) 3,000
- Table Size (L x W) (In.) 15 x 15
- Table Size with Extension (L x W) 15 x 20-1/2
- Maximum Saw Blade Width (In.) 3/4
- Table Height from Floor (In.) 44
- Table Tilt (Deg.) 10 Left, 45 Right
- Minimum Saw Blade Width (In.) 1/8
- Dust Port Outside Diameter (In.) 4
- Motor Power (HP) 1-1/2
- Motor Phase 1 P
- Motor Voltage (V.) 115, 230
- Prewired Voltage (V.) 115
- Motor Current (Amps) 11, 5-1/2
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance know to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection