Stay Connected

Powermatic 1610079 PJ882, 8" Parallelogram Jointer 2HP,1Ph

SKU 1610079
Item Out Of Stock
  • Item is out of stock.
Out of Stock
Features & Specs
Powermatic 1610079 PJ882, 8" Parallelogram Jointer 2HP,1Ph
    The 8" Parallelogram Jointer offers performance and value in a machine loaded with features. Each machine has an extra long 82" bed length for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of tough duty. The 1/8" depth limiter control knob gives you quick adjustment ability and safety. A quick twist of the knob will disable this feature. This jointer features a Powermatic controlled chip 3-knife cutterhead for a safe, smooth cut every time. Powerful 2HP or 3HP motors are totally enclosed in a heavily constructed steel stand providing plenty of power for the most demanding jobs.

  • Extra long 82" table for expanded work support
  • Parallelogram design helps maintain table parallelism and eases table raising and lowering
  • Handwheel with worm gear system for precise fence tilting (Patented)
  • 1/8" depth of cut limiter for fast table positioning
  • High-mount switch for operator convenience
  • No-mar fence insert protects table

  • Number of Knives 3
  • Standard Knife Size (L x W x T) (In.) 8 x 11/16 x 1/8
  • Cuts Per Minute 21,000
  • Cutterhead Diameter (In.) 3-1/16
  • Cutterhead Speed (RPM) 7,000 C
  • utting Capacity (W x D) (In.) 8 x 1/2
  • Table Size (L x W) (In.) 82 x 8
  • Table Height from Floor (In.) 31-5/16
  • Infeed Table Length (In.) 44
  • Outfeed Table Length (In.) 38
  • Rabbeting Capacity (In.) Ω "
  • Fence Size (L x H) (In.) 38-3/16 x 4-3/4
  • Fence Tilt (Deg.) 45
  • Fence Positive Stops (Deg.) -45, 45, 90
  • Dust Collection Minimum CFM Required (CFM) 450
  • Dust Port Outside Diameter (In.) 4
  • Motor Power (HP) 2
  • Motor Phase 1
  • Motor Voltage (V.) 230
  • Motor Current (Amps) 3/8

CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance know to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection

Please Wait... processing