Designed to perform, the JET 15” bandsaw delivers more re-saw capacity, greater throat depth and the horsepower you need to tackle bigger boards, create smoother edges and master the intricate cuts. The heavy-duty cast-iron fence system is built to give you the sturdiness and support you need for every project and features a micro-adjust dial for exact placement. The table is slotted and the guide post has a stress-free magnetic door on the front for efficient blade changes. Large, independently adjustable guides are tool-less to save you time on set up. The JET 15” steel frame bandsaw is engineered to build great projects through superior performance.
- 14" Resaw capacity for cutting large pieces of wood, slicing veneers and cutting book matched panels
- 21-1/2" x 16" precision ground cast iron table for added stability and work support
- Fence system features a micro-adjustable, dual-position side plate
- Tool-less, independently adjustable, upper and lower ball bearing guides
- Rigid, four-sided guide post with rack and pinion adjustment for optimum blade support
- Easy-to-read blade tension scale can be viewed through upper door window
- Single knob adjustment simplifies the blade tracking process
- Blade tracking window provides clear view of blade during tracking
- Heavy duty tensioning with quick release features three settings: full tension, partial tension and full release
- Cast iron trunnion for maximum support and stability
Slotted table allows for front blade removal
- Cast iron handwheels and ergonomically designed knobs make adjustments smooth and easy
- Round table insert features leveling screws for precise adjustment
- Conveniently located dual 4" dust collection ports catch dust and chips at the source
- Table tilts 5° left and 45° right to accommodate a wide variety of cuts
Specifications:
- Band Saw Size/Wheel Diameter (In.) 14-3/4
- Cutting Capacity Width (In.) 14-1/8
- Cutting Capacity Height (In.) 14
- Blade Length (In.) 133
- Blade Speed (SFPM) 3100
- Table Size (L x W) (In.) 21-1/5 x 16 x 2
- Blade Width (In.) 1/2", 6TPI
- Maximum Saw Blade Width (In.) 1
- Minimum Saw Blade Width (In.) 1/8
- Table Tilt (Deg.) -5,45
- Table Height from Floor (In.) 35
- Dust Collection Minimum CFM Required (CFM) 400
- Dust Port Outside Diameter (In.) 4 (x2)
- Motor Power (HP) 3
- Motor Phase (PH) 1
- Motor Voltage (V) 230 only
- Motor Amps 12
- Recommended Circuit Size (Amps.) 30
- Weight
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance know to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection