CMT's molding router bits save you time. Instead of searching for a particular style of frame molding when you can just as quickly and easily make your own?
With the wide range of decorative possibilities offered by CMT Molding Bits, you can always create the edge profile you want, anywhere you want and any time you want.
These CMT bits are made to last a lifetime - carbide tipped cutters and solid bar stock steel shanks withstand serious use and the trademark orange Teflon Industrial Coating makes sure you continuously get clean, smooth running cuts. Our anti-kickback feature helps guarantee you work more safely when using these wide profile bits. Recommended for use on routers of minimum 2-1/4 HP. Routers as low powered as 1-1/2 HP can be used keeping to shorter, shallower runs.
This CMT Molding Bit with Ball Bearing Guide has a 15/16" (23.8 mm) diameter, a 1-3/8" cutting length and a 1/2" shank.
D=15/16" I=1-3/8" S=1/2"
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13