Sherline 6200-CNC Ultimate Package The top of the line machine shop in one package!
- 5 stepper motor mounts factory installed
(Stepper motors, software, drivers and computer NOT included)
4400A deluxe 3.5" x 17" lathe package with chucks
2000 8-Directional milling machine
Z axis oiler and a Y axis lead screw cover
3072 1/4" drill chuck
5330 safety glasses
1074 steady rest
1191 live center
3002 cutoff tool and holder
3007 1/4"HSS tool set
3021 center drill set
3020 Sherline T-driver
3060 mill collet set
3551 mill vise
3013 step block hold-down set
3079 3/8" end mill holder
7400 6 pc. 3/8" end mill set (double ended, 2-flute)
3052 fly cutter
3054 boring head
3063 boring tool
3750 tilting angle table
3700 4" rotary table
5327 Sherline Shop Guide Book
All Sherline mills feature precision machined dovetailed slides with adjustable gibs, permanently lubricated spindle bearings, adjustable preload anti-backlash feed screws and a high-torque 90 VDC motor with electronic speed control. Speed is continuously variable from 70 to 2800 RPM without gear or belt changes. A second pulley position is also available to provide extra torque at low RPM if needed.
CNC-READY MACHINES: Any Sherline lathe or mill can be ordered with stepper motor mounts in place of the handwheels ready for the installation of NEMA 23 size stepper motors. (Stepper motors, drivers and software are not included.) Handwheels are included for use on the rear shaft of dual shaft stepper motors, but the stepper motors must be installed before manual control can be achieved. Machines equipped with stepper motor mounts are denoted by the machine or machine/accessory packages part number followed by the letters “CNC”.All accessories and handwheels that would normally come with that machine are included, but they are configured with stepper motor mounts on the crosslide and leadscrew, ready for your stepper motor and controls. The mounts feature a superior flexible coupler that is connected to the leadscrew through two ball bearings that are preloaded to eliminate play. This is a solid high quality mount.CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13