Delta Industrial Mortiser 14-651 Delta Industrial Mortiser
- Easy and open access to drill chuck for bit changing.
- Large cast-iron base with center through hole.
- Adjustable rack and pinion fence and rack and pinion head raising and lowering.
- Mortising head column can be turned 180º and remounted for off-table mortising.
- Adjustable fence and hold down.
- Adjustable dovetail way on mortising head.
- Tool and chisel tray.
- Gas-filled head-stablizer.
- Height attachment adds 1-3/4" of capacity under head.
- Multi-position feed lever.
- Adjustable depth stop.
- Chuck key/hex wrench for bit and chisel changing.
Contents: Delta Model 14-651 Mortiser with a 1/2 HP, 120 Volts, 60 hz, Single Phase induction motor; 3/8" capacity chuck and key, four mortising chisels and bits, tool and chisel holder and riser block.
SPECIFICATIONS
MOTOR:
- 1/2 HP, 120V, 60 hz, 1 Phase Induction Motor, 1750 RPM
FENCE SIZE:
- 2-15/16" x 5-13/16" (75 x 148 mm) each side, 13-5/8" (346 mm) overall
BASE SIZE:
- 16-1/4" x 13-1/2", includes post mounting area (413 x 343 mm)
CAPACITIES:
- Chuck: 3/8"
- Chisel Sizes: 1/4" x 1/4", 5/16" x 5/16", 3/8" x 3/8", 1/2" x 1/2" (5/8" max diameter shank)
- Max stroke: 5" (127 mm)
- Under head to base: 9-3/8" (238 mm)
- Chisel center to fence: 3-3/4" (95 mm)
- Under hold down: 3-3/4" (95 mm)
OVERALL DIMENSIONS:
- Height: 30" (462 mm)
- Depth: 13-1/2" (343 mm)
- Width: 16-1/4" (413 mm)
WEIGHT: