Sherline Lathe 4410C-DRO Sherline 3.5" Lathe, 17" Bed with P/N 8200 2-axis digital readout/RPM display factory installed (Metric)
SKU: 4410C-DRO
Sherline Lathe 4410C-DRO Sherline 3.5" Lathe, 17" Bed with P/N 8200 2-axis digital readout/RPM display factory installed (Metric)
Sherline Lathe Model 4410 3.5" x 17" Deluxe Lathe
1040 3.125" 3 Jaw Chuck
1069 3/8" Tailstock chuck
1074 Steady rest
1191 Live Center
3002 Cutoff tool and holder
3007 1/4" HSS 3-piece tool set (RH, LH, boring)
3020 Sherline 5/32" T-driver
3021 3-piece center drill set
1270 compound slide
3100 thread-cutting attachment
8200 2-axis digital readout/RPM display factory installed
tting attachment.
Standard equipment for the basic model Metric 4410
24" bed that has 17" between centers
2.5" resettable “zero” handwheel on the leadscrew
Two 2" resettable “zero” handwheels on the crosslide and feed screw
A powerful 90 VDC motor with electronic speed controller
2.75" x 6.0" crosslide
3057 Rocker Tool Post
Electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes.
A second pulley position available that offers extra torque at low RPM if needed
Belt
Faceplate
Lathe dog
Two dead centers
Three hexagonal keys
Tool post
Sharpened high-speed steel cutting tool
Eight-foot, three-wire power cord
Instruction booklet.
Many machinists find that the extra space between centers comes in handy when working with a part held in a chuck and a larger tailstock chuck with a long drill bit in place. The combination of chucks, part and drill can eat up a lot of the available center-to-center distance, and a little extra capacity is often appreciated. This lathe offers the same diameter turning capacities as the shorter lathe and same powerful motor/speed control. The differences are both the extra 9” of center distance and the addition of extras like the adjustable zero handwheels and rocker toolpost, making this lathe a good value for the extra cost.