Sherline 3485-CNC CNC-ready deluxe Vertical Milling Column (Metric)
With this attachment the Sherline lathe can be quickly and easily converted into a small milling machine.
- The attachment consists of a steel dovetailed vertical column with a solid aluminum base that attaches to the bed of the lathe in place of the headstock.
- The headstock then mounts to a dovetailed saddle on the vertical column.
- Parts to be machined are mounted on the crosslide. This CNC-ready version is fitted with a stepper motor mount and coupling ready for the installation of a NEMA 23 frame size stepper motor (not included).
- The mount includes two flanged ball bearings and a preload nut to eliminate end play. Sherline recommends use of a dual shaft motor so that the handwheel (included) can be used for manual control for positioning or when CNC control is not needed.
- The 2.5" adjustable zero handwheel 0.01 mm increments on the metric version (P/N 3485-CNC)
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13