Powermatic 1791317K 54HH 6" Jointer with Helical Cutterhead
This 6" Jointer features a helical cutterhead with 40 four-sided indexable carbide knife inserts – this design provides a superior finish and quieter operation compared to conventional cutterheads, and the inserts require no adjustment once they are installed. If a knife insert becomes nicked, simply rotate it for a fresh edge and continue working. Oversized infeed/outfeed tables are mounted on dovetailed ways. The fence is 38" in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a 1 HP motor with a non-slip v-belt drive for maximum performance. The 4" dust port offers easy connection to any dust collection system.
- Helical cutterhead with four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems
- 66" long adjustable infeed and outfeed tables provide more working surface
- Fine/quick adjustment lever on infeed table for precision cuts
- Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts
- Enlarged sheet metal stand provides a sturdy base
- 1HP motor offers plenty of power
- Fence controls are center-mounted for convenience
- Push button switch is lockable to prevent accidental starting
- 4" port for dust collection
- Standard Equipment:
- 1HP TEFC Motor
- Two push blocks
- Dust collection port
- Cutterhead guard
- Industrial push-button switch
Specifications:
- Number of Knives 40
- Standard Knife Size (L x W x T) (In.) 59/100 x 59/100 x 1/10
- Cutterhead Speed (RPM) 6,000
- Cutting Capacity (W x D) (In.) 6 x 1/2
- Table Size (L x W) (In.) 66 x 7-1/4
- Table Height from Floor (In.) 31-1/2
- Infeed Table Length (In.) 32-1/2
- Outfeed Table Length (In.) 32-1/2
- Fence Size (L x H) (In.) 38 x 4
- Fence Tilt (Deg.) 45 Left, 45 Right
- Fence Positive Stops (Deg.) -45, 45, 90
- Dust Collection Minimum CFM Required (CFM) 800
- Dust Port Outside Diameter (In.) 4
- Motor Power (HP) 1
- Motor Phase 1
- Motor Voltage (V.) 115, 230
- Prewired Voltage (V.) 115
- Motor Current (Amps) 13, 6-1/2
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance know to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection