Get ready for something radically different. The UNISAW, has been redesigned from the ground up and loaded with industry firsts. Like a conveniently located push-button arbor lock for quick, easy blade changes. Or a tool-free, split-design guarding system with a true rise and fall riving knife for through and non-through cuts. There's even a BIESEMEYER Fence accurate to 1/64 in.
- Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy
- Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
- The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4°
- The Cabinet Construction consists of a large cast iron base providing stability and solid footing
- Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools
- Table Top provides more surface area to stabilize the product and offers outstanding smoothness and superior ease
- The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever
- The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench
- Large, Easy to Access ON/OFF switch is multi-directional and can be activated from any angle
- Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection
- BIESEMEYER® Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an over lock with a curved edge
- On-Board Miter Gauge Storage is conveniently located on the side of the cabinet and On-Board Wrench and Push Stick Storage is conveniently located beside the switch
Specifications:
- Motor: 3 HP, 230V, 1 Phase, 60 Hz
- Arbor Size: 5/8 in.
- Blade Diameter: 10 in. Blade Speed: 4,300 RPM
- Max Rip To Right Of Blade: 36 in.
- Max Rip To Left Of Blade: 13 1/2 in.
- Depth of Cut at 45°: 2 1/8 in.
- Depth of Cut at 90°: 3 1/8 in.
- Distance - Front of Table to Center of Blade: 18 1/2 in.
- Distance - Table in Front of Saw at Max Depth of Cut: 13 1/2 in.
- Max Width of Dado: 1 1/8 in.
- Miter Gauge Groove: 3/8 in. x 3/4 in.
- Chip Exhaust Opening: 4 in. and 5 in.
- Table Height: 35 in.
- Size of Cast Iron Top (with wings only): 31 in. x 40 in.
- Table Size with BIESEMEYER® Table, Wing & Laminate Board: 31 in. x 64 in.
- Length: 71 in. Width: 37 in.
- Width with Fence on Saw: 46 in.
- Height: 35 in.
- Weight: 624 lbs.
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance know to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.