The biggest problem encountered when rabbeting is achieving a cut with a deep enough groove. Usually it takes more than one cut to get the depth you want causing you to risk precision and waste time. With CMT Rabbeting Bits, the problem is resolved.
These carbide faced rabbeting bits are fast and accurate - you can quickly produce inset doors and drawer fronts, make strong rabbet joints, mill perfect tongue and groove joints or any number of other jobs that before were time consuming and difficult. You can even re-groove old window frames to fit insulated glass panes with the extra long CMT 3/4" rabbeting bit.
Use Slot Cutters and Roundover Bits to put extra finishing touches on all your grooving and rabbeting projects.
This bit has a 3/8" (9.5 mm) cutting depth, a 1-1/4" cuting diameter, and a 1/2" cutting length. The bearing diameter is 1/2". The shank size is 1/2".
D=1-1/4" I=1/2" H=3/8" S=1/2"
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13