Home > Tools by Manufacturer > Sherline Miniature Lathes and Milling Machines
 
Home > Metalworking Tools, Lathes, and Milling Machines > Sherline Machine Tool Accessories > Sherline Tools by Part # > Sherline Part # 1000-1999
 
Home > Tools by Manufacturer > Sherline Miniature Lathes and Milling Machines > Sherline Machine Tool Accessories > Sherline Machine Tool Accessories by Part # > Sherline Part # 1000-1999

Sherline 1072 Sherline 1/4 in Tailstock Chuck & Key

SKU: 1072

100% Secure Shopping
Your Price: $52.25
Qty:
Sherline drill chuck is probably the most important accessory you will need for your lathe. It will enable you to accurately centerline drill, ream, or tap any part mounted on the lathe.

The part to be machined is chuck or collet mounted in the headstock. The tool is mounted in the tailstock chuck and fed into the part using the tailstock ram feed. Parts that are going to be mounted between centers can be center drilled this way. Other parts requiring a hole accurately drilled on center on center can also e machined this way.

These chucks can also be mounted in the headstock of the lathe.
The Sherline tailstock chuck (P/N 1072) is a precision 1/32" lathe (.8mm) to 1/4" (6.4mm) 3-jaw Jacobs chuck with key, drawbolt and two arbors. A #0 Morse arbor fits the tailstock and a #1 Morse arbor fits the headstock. When ordering the model 4000A or 4500A/4530A, the 1/4" tailstock chuck and key (P/N1072 is included

1072 Sherline 1/4 in Tailstock Chuck & Key Instructions