YOU SAVE $50.00 over the price of these items purchased individually. Sherline Lathe Model 4400 3.5" x 17" Deluxe Lathe 1040 3.125" 3 Jaw Chuck 1069 3/8" Tailstock chuck 8200 2-axis digital readout/RPM display factory installed Standard equipment for the basic model 4400 (metric 4410) 24" bed that has 17" between centers 2.5" resettable “zero” handwheel on the leadscrew Two 2" resettable “zero” handwheels on the crosslide and feed screw A powerful 90 VDC motor with electronic speed controller 2.75" x 6.0" crosslide 3057 Rocker Tool Post Electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes. A second pulley position available that offers extra torque at low RPM if needed Belt Faceplate Lathe dog Two dead centers Three hexagonal keys Tool post Sharpened high-speed steel cutting tool Eight-foot, three-wire power cord Instruction booklet. Many machinists find that the extra space between centers comes in handy when working with a part held in a chuck and a larger tailstock chuck with a long drill bit in place. The combination of chucks, part and drill can eat up a lot of the available center-to-center distance, and a little extra capacity is often appreciated. This lathe offers the same diameter turning capacities as the shorter lathe and same powerful motor/speed control. The differences are both the extra 9” of center distance and the addition of extras like the adjustable zero handwheels and rocker toolpost, making this lathe a good value for the extra cost. k and 3/8" tailstock chuck (metric model 4410A)