Delta Table Saw 36-790 Delta RT-40 14"/16" Tilting Arbor Saw

SKU: 36-790

100% Secure Shopping
MSRP: $11,238.77
Your Price: $6,226.00
You Save: 45%
Qty:
Delta Table Saw 36-790 Delta RT-40 14"/16" Tilting Arbor Saw.

Features:
  • A powerful 7 1/2 HP motor handles the hardest woods
  • The standard 14" blade has a 4 1/2" depth-of-cut, 3 1/8" at a 45° angle
  • Attach a 16" blade and increase the depth-of-cut to 5 1/2" and 4 1/8" at a 45° angle.
  • The drive system is powered by a totally enclosed, fan-cooled 7 1/2 HP motor
  • Double V-belt drive can be set for speeds of 3000 or 4500 rpm for best cutting performance.
  • Motor plate, trunnions and arbor support bracket are constructed of cast-iron for solid support and vibration-free operation at the saw arbor.
  • Arbor runs on pre-lubricated, sealed ball bearings and raises to the correct height and angle by a rack and wormscrew operating mechanism.
  • T-slots on either side of saw blade hold miter gage securely, even beyond front of table. With miter gage fully extended, you get 30 1/2" cutoff on 1" stock using a 14" saw blade.
  • Saw blade stops, adjustable from the top of the table, assure perfect 90° and 45° settings.
  • Massive table (includeing extension wings) is 43" x 59" in size, providing extra support for handling large stock. Table is heavily-ribbed to prevent warping and distortion.
  • The three-point locking Biesemeyer® T-Square® Commercial Saw Fence System ensures the fence will be precisely parallel to the blade and will provide a smooth clean cut accurate to 1/64th of an inch.

    36-790 Delta RT-40 14"/16" Tilting Arbor Saw Owner's Manual

    Contents: Delta Model 36-790 14"/16" Tilting Arbor Saw includes a 7-1/2 HP, 200-220/440 Volts (wired for 220 Volts), 60 hz, Three Phase motor with low-voltage (LVC) push-button station, magnetic starter and automatic reset overload; blade guard, Biesemeyer Commercial Fence System, guide bar, miter guage, 43" x 59" table with two extension wings and fence support extension.

    SPECIFICATIONS

    MOTOR:

    • (TEFC) 7-1/2 HP, 200-220/440V (Wired 200-220V), 3 phase, 60 hz

    BLADE:

    • Hole: 1" (25 mm)
    • Arbor: Up to 16" (406.4 mm)
    • Diameter: 1" (25 mm)
    • Speed: 3000-4500 RPM

    CAPACITIES:

    • Maximum depth of cut (NOTE: blade will not go completely below table unless you use a 12" or smaller block - 16" blade lowest position is 1.4" above table surface; 14" blade lowest position is 0.4" above table surface
    • With 14" blade: 4-1/2" (114 mm)
    • With 16" blade: 5-1/2" (140 mm)
    • Maximum rip to right of blade: 51-3/16" (1300 mm)
    • Maximum thickness of cut at 45º:
      • With 14" blade: 3-1/8" (79 mm)
      • With 16" blade: 4-1/8" (105 mm)
    • Distance, front of table to center of blade: 22-13/16" (579 mm)
    • Table in front of 14" blade at max. cut: 17-1/8" (435 mm)
    • Maximum width of cut-off
      • With 14" blade (1" stock) using fully extended miter guage: 30-1/2" (775 mm)
      • Max. width of dado: 13/16" (21 mm)

    TABLE:

    • Height: 33-7/16" (849 mm)
    • Size: 39-3/8" x 43-1/4" (1000 x 1099 mm)
    • Size, including two extensions: 59" x 43.3" (1499 x 1100 mm)
    • T-Slot miter guage groove on either side of saw blade
    • Removable table insert with built-in leveling screws

    CABINET SIZE:

    • Width: 32-3/4" (832 mm)
    • Depth: 25-3/4" (654 mm)

    CHIP EXHAUST OPENING:

    • 4" O.D. (102 mm)

    ARBOR SPEED (2):

    • 3000 & 4500 RPM

    OVERALL DIMENSIONS:

    • Length: 49-1/2" (1257 mm)
    • Width: 98" (2489 mm)
    • Height: 41" (1041 mm)

    WEIGHT:

    • 1500 lbs (680 kg)
    • Without fence: 1381 lbs (626 kg)
  •