Home > Woodworking Tools-Woodworking Supplies > Stationary Power Tools
 
Home > Woodworking Tools-Woodworking Supplies > Stationary Power Tools > Boring Machines
 
Home > Tools by Manufacturer > Delta Woodworking Tools > Delta Boring Machines

Delta Horizontal Boring Machine 32-350-Discontinued By Delta

SKU: 32-350
Item is out of stock.

100% Secure Shopping
MSRP: $4,278.00
Your Price: No longer available
Delta Horizontal Boring Machine 32-350

  • Adjustable hold-down clamp and boring head are pneumatically controlled by a foot pedal to keep operator's hands free. See-thru guard protects from flying wood chips.
  • Heavy cast-iron table features dovetailed miter gauge slots for kpeeing miter gauge secured when locked in place. Also with standard-equipped stock stop for operations that require repetitive drilling.
  • Loosening the nut just below the boring head allows the operator to quickly adjust the depth stop for final drilling depth. guide rails are concealed inside flexible rubber tubing for protection against dust and chips.
  • Tough cast-iron table is mounted on dove-tail ways with an adjustable gib. The four bolts located on the right-hand side may be adjusted to compensate for wear.
  • Aluminum Boring head contains two adjustable spindles. Easy-to-read scale and reference lines for accurate setting. Convenient grease fitting accepts standard grease gun for lubricating boring head.
  • Built-in chip chute directs dust and debri away from machine.
  • Cast-iron carriage supports motor and boring head.
  • Adjustable feed rate knob controls boring speed at which the drill bits enter the workpiece.
  • Fabricated steel cabinet has bolt-down feet for operating stability.


Contents: Delta Model 32-350 Horizontal Boring Machine with a 1 HP, 3450 RPM, 115/230 Volts, Single Phase motor (wired for 230 Volts operation); adjustable hold-down clamp with see-thru guard, cast-iron table with dovetailed miter gauge slots, miter gauge, adjustable stock stop, adjustable boring head, drill bit adapter, steel cabinet, foot pedal, dust chute and wrenches.

SPECIFICATIONS

MOTOR:

  • 1 HP, 3450 RPM, 115/230V, 60 hz, 1 Phase

SPINDLE:

  • Accepts 7/16" - 14 RH TPI Adapter (accepts 10 mm shank bits)

MAXIMUM BIT DIAMETER WITH SPENDELS AT 3/4" ON CENTER:

  • 5/8" (15 mm)

DRILL STROKE (CARRIAGE STROKE):

  • 3-7/8" (98 mm)

MINIMUM/MAXIMUM CENTER DISTANCE OF SPINDLE:

  • 3/4" to 3" (19 to 76 mm)

AIR REQUIREMENT:

  • 90 PSI

TABLE TRAVEL TO CENTER OF BIT:

  • 3-1/2" (89 mm)

MAXIMUM MATERIAL THICKNESS (TABLE TO GUARD):

  • 8-1/2" (216 mm)

TABLE SIZE:

  • 15-3/4" x 9-7/8" (400 x 251 mm)

OVERALL DIMENSIONS:

  • Length: 37-1/2" (953 mm)
  • Width: 15-3/4" (400 mm)
  • Height: 48" (1219 mm)

WEIGHT:

  • 303 lbs (138 kg)