Home > Tools by Manufacturer > Sherline Miniature Lathes and Milling Machines > Sherline Machine Tool Accessories
 
Home > Tools by Manufacturer > Sherline Miniature Lathes and Milling Machines > Sherline Machine Tool Accessories > Sherline Machine Tool Accessories by Part # > Sherline Part # 2000-3999
 
Home > Metalworking Tools, Lathes, and Milling Machines > Sherline Machine Tool Accessories > Sherline Tools by Part # > Sherline Part # 2000-3999

Sherline End Milling Collets 3060 Sherline End Milling Collets, (3 Piece Set) (Inch)

SKU: 3060

100% Secure Shopping
Your Price: $42.75
Qty:
1/8",3/16",1/4"

Sherline milling collets are designed to be used with the Morse # 1 internal taper that is standard on the both the Sherline lathe and vertical mill.

Because of the shallow angle of the Morse #1 taper when the drawbolt is tightened, greater clamping force can be applied when compared to the to the clamping pressure of WW collets. Therefore, it is recommended the use of these milling collets for holding miniature size end mills (3/16" or 1/4" shank), #1 and smaller center drills or Dremel bits (1/8" shank), and assorted other cutters. Cutting tools held by these collets must have a shank size within .001" of the manufactured size. Because of the shallow taper angle, these collets will not loosen from the spindle without backing the drawbolt off a couple of revolutions and tapping the drawbolt to free the collet.

Sherline Milling Collets Instructions